Hi, I have two different sites with same network on both sides. I want to establish VPN tunnel between these two sites. I dont want to change the IP addreses in my Network. I want to do NAT on PIX for the users on one site..How is this possible..
I have 6500 with redundant sup2/msfci have configured vlan in msfcinterface Vlan204 ip address 129.1.204.34 255.255.255.0 alt ip address 129.1.204.35 255.255.255.0 no ip redirects no ip route-cache no ip mroute-cache standby ip 129.1.204.31 standby t...
Is it necessary to have ARM router in 8540 to terminate PVC in the Main ATM interface.I am trying to terminate PVC between 4500 atm and 8540MSR. I can see the PVC up but i cannot PING across..
I have web server https enable in dmz of Pix. The inside of the PIX is connected to the Lan of the Main site.I have ipsec running between the Main site and branches. This tunnel is terminated on 7200 in Main site and 2600 in branches.The remote site...
Hi, Ip proxy arp is not enabled on any Vlans...I am having 98,2000,95 OS in all the OS its the same.When i dont give any gateway i will not be able to reach any PCsin any other Vlan. But if i give an ip adress belonging to any other vlan as gateway ...
Hi, I simulated the same scenario in my office with another 6500 with msfc....If u have 6500 and msfc ...and configure vlans in msfc...the gateway given in the clents can be any adress which has an entry in msfc...regardssalel MD