Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My wireless network setup gotA WLSE and WDS with lots of Aironet 1210One SSID with MAC authentocationLAN and WLAN on same network We are in process of seperating WLAN and LAN by means of VLAN and want to retain the old setup for WLAN with a different...
I was able to integrate NT Domain authentication for the VPN clients, however I need to know if I can restrict this Authentication to a particular User group in the NT. All other users should not be allowed to VPN in.
I have three Subnets connected through a router in my LAN (Inside interface)route Outside 0.0.0.0 0.0.0.0 1x.1az.az.161 1route Inside 192.168.2.0 255.255.255.0 192.168.0.254 1route Inside 192.168.16.0 255.255.255.0 192.168.0.254 1route Inside 192.168...
Only icmp works I get following in the syslog for RDP and other applicationsJan 29 2008 11:46:13: %ASA-6-302013: Built inbound TCP connection 2692400 for Inside:192.168.0.77/4442 (192.168.0.77/4442) to Inside:192.168.16.74/3389 (192.168.16.74/3389)Ja...
Hi pengfang if you can help me with VPN can you address this "I was able to integrate NT Domain authentication for the VPN clients, however I need to know if I can restrict this Authentication to a particular User group in the NT. All other users sho...
Strange is it true PIX/ASA cannot redirect packet comming and leaving same interface ? Thats what I came to know from a colleage, Other firewalls do that, is there a way to make it happen using NAT policy/NAT rule etc.I don't think it is feasible for...
