HI, Currently desiging a Mesh Network to cover a large area and i am working with the AP1552EU AP that has 3x 2.4GHz antenna Slots and 3x 5GHz antenna slots. I will be using the 5 GHz for backhauling, but would like to know how many 14-dBi Direct...
Is it possible to run the below Raid Configurations on the same C-Series Server?Raid 1: with 2 HDDRaid 5 with 3 HDDI know it is not possible on the C200 due to lack of HDD Slots, but is it possible on the C210 or C250.Regards
Dear Vlad, I thank you for your support. you have mentioned that every hop will half the availble througput, for example RAP will have X mbps, MAP A1 will have X/2 and MAP A2 will have X/4 mbps (RAP ---> MAP A1 ----> MAP A2). Is halfin...
vlad, I really appreciate your support, thank you for your clear explanation. May i ask if can i use 3x 8 dbi antennas to create a backhaul between 2x mesh access points 400 meters apart? Or is 200m the maximum i can achieve. Because frankly i a...
Hi vlad, The AP i am using is the AP1552EU not the AP1552s.http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1550-series/data_sheet_c78-641373.htmlas per the data Sheet it has 3x 2.4GHz antenna Slots and 3x 5GHz antenna slots, unl...
Thank you for your response and support, i just have one more inquiry about this matters, can the UCS C-Series Rack servers be populated with different hard disk types at the same time, or example 2x 76G 15K and 3x 300G 10K on the same UCS C210 serve...
