Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How to check if the control connection between vBond ( SD-WAN Validator) and vSmart (SDWAN Manager) is up.The show sdwan control connections command is not working for me on this controllers. It just work on Cedges
Hello Team,We have a requirement to monitor traffic, specifically download and upload speeds, only for a particular source, destination, and port as it passes through a Cisco IOS XE cEdge (SD-WAN).Could you please let us know if this is feasible with...
Hello Team,I'm encountering an issue where a tablet device with a statically assigned IP address reaches the RUN state on the Wireless LAN Controller (WLC), but its MAC address does not appear on the switch port connected to the AP it's associated wi...
Hello everyone,Need your assistance on below case.We are experiencing intermittent Wi-Fi disconnections affecting iPhone users. Upon analyzing the signal strength, we found that their RSSI is typically around -67 dBm. Below are the RF profile data r...
Hello everyone,The down APs have automatically disappeared from the join statistics of the 9800 WLC and are neither visible nor up in the WLC.Could you please help explain this behavior? This makes it challenging for us to proactively track historica...
Hello,I’ve completed the on demand troubleshooting as you asked. However, there are numerous application families and sub-sections in the output, and we currently don’t have visibility into the traffic—only the source and destination details.Is there...
Passive client is disabled. I will try to test this on monday. I dont think it will solve the issue because its about the arp broadcast. I am not even getting mac address on the AP switchportWhen I give static IP Address then it goes into the RUN Sta...
Hello Marce,The DHCP Required option is already unchecked in the Advanced section of the policy profile associated with this SSID.Additionally, the MAC address of the tablet device is not being learned in either of the following scenarios:Using DHCP:...
