About kenjim

kenjim · 05-23-2003

I had problem with 3620 router w/z 24MICA modem and PRI/CSU(2 T1) module. When I look at "show isdn status", Layer1 was showing "Deactivated", so I check with our carrier(teleco) but they told us PRI line seems no problem.After I tried several fixs ...

kenjim · 05-29-2003

OK, I'll do so.Appreciate your kindly advice.

kenjim · 05-27-2003

No, T1 was connected to 1/0. I meant to say original config had line coding and framing configuration for both 1/1 and 1/0, but current config have only 1/0.

kenjim · 05-27-2003

Here is a original config and current running config. Only difference from current running config is number of controller's setting.ORIGINAL CONFIG!version 12.1no service single-slot-reload-enableservice timestamps debug datetime localtime show-timez...

kenjim · 05-23-2003

Thank you for your reply. As I mentioned in first posted message, router is now working and Layer1 is UP. My concern is why my router didn't detect Layer1 when I configure the router first time. I tried to reload router couple times, but didn't work,...

Member Since	‎05-23-2003 11:59 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	5

User Statistics

User Activity

Cisco 3620 Remote access bundle Layer 1 Deactivated

Re: Cisco 3620 Remote access bundle Layer 1 Deactivated

Re: Cisco 3620 Remote access bundle Layer 1 Deactivated

Re: Cisco 3620 Remote access bundle Layer 1 Deactivated

Re: Cisco 3620 Remote access bundle Layer 1 Deactivated