Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,i've implemented authorization and it basically works. The user can only use a limited set of commands (show int status, conf t, interface ethernet, interface gigabitethernet, interface fastethernet, shut, no shut).Now I try to configure ...
Hi everyone,we have a Cat 6500 running 12.2(33)SXH which generates the following Logmessage:10:09:51.760 FW[Mod 01]: METROPOLIS #1 cnt=4 reg:[1B0]kic_kic_int 0222:22:56.696 FW[Mod 01]: METROPOLIS #0 cnt=5 reg:[1B0]kic_kic_int 0222:22:56.696 FW[Mod 01...
Maybe something like this...CSCsk34832 Bug Details Memory leak in HTTP CORE PID 174Symptoms: Memory leaks out at about 10 to 15 percent overnight.Conditions: This symptom occurs when a mix of application traffic is sent tothe HTTP Secure server and w...
had the same problem. Installed 12.2(46)SE and was able to enter the option...unfortunately the DHCP Server doesn't seem to send option 67 or 66.!!ip dhcp pool DATA network 192.168.6.0 255.255.255.0 default-router 192.168.6.1 dns-server 192.168...
To me it looks like you are trying to do a feature upgrade. Since you are using the "archive" command you will need to add some options.archive download-sw /allow-feature-upgrade /no-version-check /overwrite tftp://x.x.x.x/filename.tarCheck the follw...
