I have a 2513 router running IOS 11.2. We have a DHCP server on the token ring side and have just added some worksations on to the ethernet side. I also have a IP FORWARD-PROTOCOL UDP 1604 and IP HELPER ADDRESS' for Citrix servers (and the DHCP SERVE...

I have a 2513 router running IOS 11.2. We have a DHCP server on the token ring side and have just added some worksations on to the ethernet side. I also have a IP FORWARD-PROTOCOL UDP 1604 and IP HELPER ADDRESS' for Citrix servers (and the DHCP SERVE...

I have a T1 FR circuit with mutiple point-to-multipoint PVCs and I am using FRTS to limit the amount of traffic for each PVC. Should I still be seeing BECNs and dropped packets on these PVCs?

I have a frame-relay T1 with multiple point-to-multipoint subinterfaces sharing it. I want to limit the amount of bandwidth each PVC uses. I have some simple Traffic-shaping parameters set, but I still see BECNs and dropped packets. Are there other t...

I have 2 T1s between location A and B. Location A has one 3620 router (R1) and location B has 2 7206s (R2 and R3), with one T1 going to each. The 2 routers in loc B are connected via FE ports to the same switch. I am using OSPF.R2 is sending data des...