About CiscoMan86

CiscoMan86 · 11-14-2024

Hi,I have two 9300-24UX and on both I have the same problem. Both are factory-resetted and started in ROMMON. Then I booted the switch with boot usbflash0:<filename>.bin from my USB Stick. After they started, I will install and activate the IOS: inst...

CiscoMan86 · 11-14-2024

Now, I used an other USB Stick, with this the recovery is working. Strange. But now I'm happy.@Leo Laohoo Thx for the info with the emergency-install command!

CiscoMan86 · 11-14-2024

And why can the switch start the first steps from USB? That's not logical!switch: emergency-install usbflash0:cat9k_iosxe.17.09.05.SPA.binWARNING: The system partition (bootflash:) will be erased during the system recovery install process.Are you sur...

CiscoMan86 · 11-14-2024

Thx @Leo Laohoo, one Switch is now okay and installed with 17.9.5.But when I try the command on the other Switch I get an error:switch: emergency-install usbflash0:cat9k_iosxe.17.09.05.SPA.binWARNING: The system partition (bootflash:) will be erased ...

CiscoMan86 · 11-14-2024

Sry, I don’t understand your Question. What do you mean? When you mean the IOS XE version, I use for all the devices IOS XE 17.9.5.

CiscoMan86 · 11-14-2024

after booting are you able to dir usbflash0: ——> no, i‘m NOT able to dir usbflash0:, because usbflash0 isn‘t there (this is my problem)i am more keen to know what is other models and what IOS Xe running on that devices ? —-> for example 9300-48T or...

Member Since	‎11-14-2024 08:56 AM
Date Last Visited	‎11-21-2024 09:46 AM
Posts	6

User Statistics

User Activity

After booting from ROMMON USB stick is then no longer recognized

Re: After booting from ROMMON USB stick is then no longer recognized

Re: After booting from ROMMON USB stick is then no longer recognized

Re: After booting from ROMMON USB stick is then no longer recognized

Re: After booting from ROMMON USB stick is then no longer recognized

Re: After booting from ROMMON USB stick is then no longer recognized