Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts,I have been trying to configure the integration of Microsoft Lync server with our Cisco 3845 router for voice communication using SIP.The issue I ma facing here is, I am unable to register the DSP resources for transcoding. When I create a...
I was wndering if I can have group ports to a etherchannel situtaed on a two different switches (one on Cisco 4506 and another on the Cisco 3750G). At the remote end we have two Cisco 4948 switches, hope that too supports this kind of configuration.A...
Hi All,We are observing a peculiar problem, where the client end engineers when they try to upload any file to one of our IBM AIX box, behind the firewall, the upload stalls (fails after 20-50%), after a while. when we move the server out of the fir...
I found a strange thing in our VPN concentrator 3000. Under IKe Proposal, I do not find if AH. Only ESP combination what I find. Any idea, how I would be able to activate that AH on my box?ThanksArabinda
Guys I noticed a peculiar problem, when my SFTP server is being placed behind a ASA box, the file transfers fail after an anonymous period of time (but conencts for sure). But the thing works fine, when no firewall is present. Is it some type config...
Hi Rais,The link suggests the kind of etherchannel I want is supported by Cisco 3750G since it has the facility of stacking. unfortunately our Cisco 4948 and 4506 do not have stacking. So let me try out in a Lab regarding load balancing using PVST.Th...
Hi Farrukh,We are a offshore development center. Sometimes we need to use those IKE parameters which our client engineers want to. No worries time the client agreed to use ESP, so all set now. Thank you for the valuable info.ThanksArabinda
Hi,Till the time all the networks are connected to the same Firewall interfaces, the firewall woujld assume them as directly connected to network. No routing required for communicating among the machines placed behind different interfaces of the fire...
