Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We are having predictive mode outbound dialer configured in our setup.As per predictive mode CTI Toolkit and agnet ip-phone should go in reserve mode but in our case only CTI toolkit is going in reserve mode there is no activity on IP-Phone. O...
Dear All,We are getting hits from subscriber (CUCM 7.1) to our sprawller(ICM 7.5) server on port 32229 and 32271 which are in the range of rtp/srtp.Idealy cucm do not communicate with ICM on these ports.In which scenario CUCM can communicate with ICM...
Hi,We are having CUCM 7.1.3 cluster with 1 pub and 2 sub. Yesterday we faced a problem that Sub-1 was in hang state.After restart of the sub 1 it started working fine. Attached system logs for same.As per logs sub 1 hanged around 12:45 PM and we have...
Hi,In outbound dialer transfer to CVP scenario how many dialer port will be utilized?It must be using 2 ports, one for dialing to customer and another port for dialing to ICM routing script.Kindly clarify my doubt.ICM: 7.5CVp: 7.0Thanks,Santosh
Hi Guys,We want to run a query in ICM HDS database using script node id which i got from script monitoring.This we require to check the call abandoned at node level.Kindly share the table and query details.We are having ICM 7.5Thanks & Regards,Santo...
Hi Geoff,I have checked in router log viewer but there is no error. IP-Phone lable is getting mapped correctly as per router log viewer.Regards,Santosh
Hi,I have attached herewith my UAT and Production admin & route script.Below is the scenario which is happening in UAT and Production in case of Predictive dialer mode,UAT: After uploading a campaign file cisco cti agent desktop and ip-phone both goe...
After agent desktop reservation and customer call connection with dialer call is getting transfer to agent IP-Phone successfuly.Our production ICM version is 7.5.6 and UAT ICM version is 7.5.In production its happening like this way.But in UAT agent ...
