Hi,I have two VG224 connected to some switch via ethernet and everything was OK until one week ago. Ok means that two VG224 were registred with primary CUCM (we have two CUCM in cluster) and everything work fine, One week ago one of VG224 start to di...
Hi,When the call is made by Cisco Ip phone 7911 big echo is being heard during the conversation by the caller. The same call made by Cisco IP phone 7960 is excellent. Call statistics for the two calls are:7911 Avg Jitter 1 Max Jitter 3079...
Hi, In our VG 2811 have two E1 lines from two different Telco’s. When I type debug isdn q931 on the first E1 for incoming calls information is Plan:ISDN, Type:National On the second E1 the output is Plan:ISDN, Type:National/International Can I c...
HiI have two question and I hope someone can help me1. When I call DN and the prime line is in use, the ring out tone (of my prime line) to be different for the second line (called DN). Now I have same ring out tone for all calls I made. How to acco...
HiI have strange problem with ports of my Cisco 4507R-E switch. Sometimes is happened when I look in my CUCM 6.1 to see that one or more phones are not registered. I telnet to 4507R switch to see status of port where IP Phone is connected show ip int...
I releoad the VG and the problem is nos solved. After 24 hours VG disconnect from Primary and register to Secondary. Ios version is 12.4(13r) and all 4 VG224 in our network use this version but only one have problem. Any idea?Thanks,
it is possible to do in CUCM 6.1 so it,s no reason why can no be possible i n CUCM 7. I solve this isue with creating new entry for end user and for cell phone number without Device Associations. User ID XXXXXXXXXXlast name YFirst name X Telephone n...
Adding 01 and removing the first two numbers from the mac address is to register Ata for second DN. Because your ATA not get IP address try to connect PC to that port and see from which VLAN you will get IP address. For firs registration of IP Phones...