About fenton

fenton · 12-16-2012

Prior to doing a full upgrade of my UC560, I attempted to use CCA to do a backup of my configuration, voicemail, etc. The process seems to get fairly far (backing up CUE), and then CCA informs me that the backup failed.I was getting "%SYS-2-BADSHARE...

fenton · 12-21-2012

Good call! I neglected to consider the fact that our SA520 is doing the inter-VLAN routing, so it was routing packets to/from the CUE (VLAN 90). I reconfigured my CCA PC to a static configuration with the UC560 as the default, and the backup succee...

fenton · 12-20-2012

Yes, the PC running CCA is locally connected through a wireless connection to a Cisco Aironet 1142 access point (bridging) and SF300-48P switch. It's on the same subnet as the data subnet the UC560 is connected to.

fenton · 12-20-2012

Well, okay, I can (and will) review the connection requirements. But are you saying that if I don't meet one of the connection requirements, an IOS internal memory management error will result? There shouldn't be anything I can do from a PC running ...

fenton · 12-20-2012

Alex,Yes, the config already has "ip virtual-reassembly in" for Gig0/0, Integrated-Service-Engine 0/0, vlan1, vlan90, vlan 100. Any other ideas?-Jim

Member Since	‎09-02-2004 01:02 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

UC560 backup to CCA failing with IOS error

UC560 backup to CCA failing with IOS error

UC560 backup to CCA failing with IOS error

UC560 backup to CCA failing with IOS error

UC560 backup to CCA failing with IOS error