Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This appears as though it might work but from my testing seems to rely on the respective Sup being the ACTIVE unit before it will return any values... http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a94.shtmlRefer also:...
Further to my post above i've not found any reference to other bugs of relevance since...Is the ingress port 10GbE and egress port 1GbE in your case or some other physical configuration? Try tuning the buffers / QoS (assuming it's enabled) or otherwi...
Hi All,We're experiencing the same issue on 12.2(58)SE2 and have reported to TAC SR#622534173 In our case this is casting doubt on the validity of the output drop counters for any interface and is likely masking the root cause of other potential issu...
