Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dears, I need to convert outside-ACL & NAT from 8.2(5) to 9.2 on ASA.Could anyone provide me with the correct syntax since I tried to make it but it seems need some modification. Old Configuration:interface GigabitEthernet0/0 nameif outside security-...
Dears, I have a Cisco ACE (image: c4710ace-t1k9-mz.A5_2_1.bin) configured for SSL termination with load balancing in addition to client authentication. I have a situation that require the ACE to pass expired client certificate currently deployed on s...
Dears,I have a question about upgrade NAC Module, I follow standalone procedure to do the upgrade but I wonder about the upgrade file should I use because on the Cisco site I didn't find the upgrade file from 4.8.0 to 4.8.2.what I found is nme-nac-up...
Dear all,I had a question about how I can configure a FAX machine in voice environment ....I have the following :Phones ----- CUCM --- Voice Gateway (using SIP Trunk) ...what I need to know how I can configure the FAX machine in this environment ??!!...
Dear All...I would like to find a solution for two main points in IP Telephony implementation, Have you ever been faced these Issues?1- Intercom for Group (Manager with section of 10 employees, when I manager use Intercom button, the 10 employee will...
Hi
This public IP is not for any server it is for outside interface.
And as I provided before all needed information for conversion
Could you please advise
Dear Vibhor Thank you for your reply and thanks for cooperation. I know that there is a conflict between the VPN NAT statement but each one for use one for anyconnect and one for remote access VPN. So I need your help to convert them as is. another q...
Dear Kanwalsi To pass only cert-expired !!! what do you think to apply the following parameter-map type ssl TESTauthentication-failure ignoreauthentication-failure redirect unknown-issuer url http://TEST.com/sorry.html 302authentication-failure redir...
I have requirement to ignore the client cert expired for the clients in my networks , so I want to know the best way I can do it , as I only need to allow ACE to pass the expired cert and appropriate client certs and if ACE receives a wrong cert the...
If I configure authentication-failure ignore , is that ignore all certificate errors ?!I have some concerns regarding security issues that if ignore option can be used does it pass expired certificates only or this will cause clients with no certific...
