The problem might come from the following behaviour : The controller maintain an association table for each wifi device. This table is cleaned when the device desassociate with a 802.11 disassociation message, which is optional. Most device don't sen...
Unfortunately there is no standard way to do that.The association process and the roaming process is a client decision. Which means that the client hardware and driver will scan for available AP and then select the "right" AP depending on its own alg...
The Aironet 15xx series do not support 802.11n. They have 2 radios. One on 802.11a 5GHz for backhaul, and one 802.11b/g on 2,4GHz for access.RgdsVincent
Have a look at :http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/prod_white_paper0900aecd804f1a23_ns337_Networking_Solutions_White_Paper.htmlandhttp://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwap...
Hello,EAP-FAST establish a secure tunnel between the supplicant and the RADIUS server before sending the client credentials over the air. The secure tunnel is established by using PAC credentials that can be auto-provisionned or manually provisioned....
