About Saleh Baduqail

Saleh Baduqail · 04-24-2018

Hi, I am receiving following warning messages for all the 6 ports in WS-C4500X-16 which are connected to access switch 2960-X. Fiber is Multimode and sfp at both ends are SFP-10G-LRM. I have even tried checking by directly connecting to access s...

Saleh Baduqail · 04-25-2018

Hello Mlund, There is already an attenuator connected to the fiber and transceivers are also Multimode at both the end. Saleh

Saleh Baduqail · 04-24-2018

appreciate if anyone can support for any more workaround

Saleh Baduqail · 04-24-2018

Hi John, Fiber patch cord cable is commscope ffxlclc42-mxf010, which is OM4. Regards, Saleh

Saleh Baduqail · 04-24-2018

Hello Leo, Yes, I have already done that. still the warning appears

Saleh Baduqail · 05-16-2016

I have done the ncs cleanup for PI 3.0, without stopping ncs will it face any problem? and its an HA setup. its been more than 2 hours now. its still Stopping server

Member Since	‎04-21-2011 03:00 AM
Date Last Visited	‎04-21-2019 10:46 AM
Posts	7

User Statistics

User Activity

%SFF8472-5-THRESHOLD_VIOLATION: Te1/3: Rx power high warning; Operating value: 2.0 dBm, Threshold value: 0.4 dBm.

Re: %SFF8472-5-THRESHOLD_VIOLATION: Te1/3: Rx power high warning; Operating value: 2.0 dBm, Threshold value: 0.4 dBm.

Re: %SFF8472-5-THRESHOLD_VIOLATION: Te1/3: Rx power high warning; Operating value: 2.0 dBm, Threshold value: 0.4 dBm.

Re: %SFF8472-5-THRESHOLD_VIOLATION: Te1/3: Rx power high warning; Operating value: 2.0 dBm, Threshold value: 0.4 dBm.

Re: %SFF8472-5-THRESHOLD_VIOLATION: Te1/3: Rx power high warning; Operating value: 2.0 dBm, Threshold value: 0.4 dBm.

I have done the ncs cleanup