Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Historically with capacity planning, once a link started running over a predetermined threshold on a regular basis it would be time to consider a bandwidth upgrade. WAN optimization devices removed some of the factors that prevented protocols from u...
Morning,Has anyone had any success with configuring a Catalyst 3750 with a Voice VLAN (Cisco phones) and 802.1x dynamic VLANs?Is a RADIUS server able to provide values to change the native vlan?Is there a decent tech note knocking about for configuri...
Hi,Does anyone know whether the PIX v7 code supports spoke to spoke connectivity overs VPNs?E.g. 3 sites, Hub, Spoke A and Spoke B. Spoke A and B connect into Hub (PIX) with VPNs.With earlier software versions, the spokes would not be able to commun...
Are there any guides or known values for recommended memory utilisation on a router?If I've got a 7200 router that is acting as an Internet gateway and is quite happily performing at 70% mem utilisation (the value seems pretty static), is that OK?Are...
Does anyone one have any experience with actual throughput of a FWSM in a C6500 (sup720)?I have a scenario where two servers on the same subnet can transfer data at ~1Gbps, when they are put on VLANs belonging to a FWSM context (one server per VLAN),...
Andy,Thanks. So the access VLAN modifies the native VLAN? I was wondering if it only worked on access ports, rather than trunk ports.The owner of a multi-tenant building wants to use the ACS to assign users to VLANs (via MAC addresses). It is supp...
Hi,The proc is chugging along quite happily, barely breaking a sweat.The router is taking full Internet tables and the memory is stable at a constant 70% utilisation. I don't think it should be a problem, providing that utilisation is monitored. I ...
The investigation of the problem ran out of steam really as the customer's attention was diverted elsewhere.However it looked as if throughput through the FWSM was ~550Mbps. I didn't get a chance to look at throughput stats of traffic across the MSF...
Is there any useful output from the VPNClient Log Viewer or the device you are connecting to? Are you passing traffic over the connection before it terminates or is the tunnel sitting idle?Gareth
