Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi to everybody and first of all sorry for my bad english...I have this problem: we have in our office an ASA5510 (8.3.1, 6.3.1) with a l2l with a remote office that works without problem on an ASA5505 (9.1.2, 7.1.3) and also a remote VPN IPSEC from ...
Hi, from the last firmware 8.4.2 with asdm 6.4.5 I have a problem on ASA5505 to pinging the inside of asa and to accessing in telnet or https through a VPN tunnel: the ASA doesn't respond to ping, telnet and https on the inside interface. I can pingi...
Hi to all, I have a problem after upgrading the ASA5505 unlimited to 8.4.1, the message shown after startup is:IO memory blocks requested from bigphys 32bit: 9672It has 512 Mb of ram and this is the view from sh ver: Cisco Adaptive Security Appliance...
Hi at all and sorry for my bad english...I have a problem configuring url filtering on ASA 5505 rel 8.3.1: I have to block the web navigation to facebook and, with my configuration, it works fine.The problem is when I try to access on other sites whe...
Here is the config of the asa at the remote side (ASA2).There is a l2l between the 2 asas and from the lan behind ASA1 I cannot close any mobile vpns.I cannot post the config of ASA1.Many thanks!!!ASA Version 9.1(2) !hostname asa-miodomain-name intra...
Waiting to open a TAC, I've done a downgrade to 8.3.1 andasdm 6.3.1, tha ASA5505 works correctly andthe error message disappears. Thank you for the support
Hi, I reloaded the ASA and made all that you wrote in the instructions but the problem persists...The ASA works correcty but it views the error in every reload: IO memory blocks requested from bigphys 32bit: 9672Thanks
