Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have installed a 9130 EWC and it is running version 17.9.6 successfully.I also have a 3702 running in lightweight mode with LWAPP image version 17.9.6.40 to match. However it will not join the EWC controller.On the 3702 side I see:*Feb 1 04:41:49.0...
@Scott Fella I know high cpu use is expected behaviour. I just didn't want to run a vm that ran 100% 24x7 even with minimal traffic.However, you inspired me to investigate further, and I can confirm you can avoid this high cpu by deploying just flexc...
Hi @Scott Fella, I did try CL version before on esxi, but it has a known 'feature' where at least one cpu core is pegged at 100% 24x7. It isn't very practical for low utilisation home network.The 3702 has served me well for many years, but 3802 can b...
Hi @Kasun Bandara It is normal internal model. It turns out that EWC 9800 does not support x700 AP generation at all in any version. I misread support matrix for 9800 CL as applying for EWC as well.
I'll answer my own question.Grrr, 3700 are supported on C9800 17.9.6 EXCEPT in the case of EWC. See https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#c9800-embed-ctr-ap_support
