Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So about a month ago I did a network upgrade for a client 2x 1841 to 2x 1921, 2x 4948 to 2x 4948E, and 2x 2950 to 2x 3650. I basically just copied and pasted the config over with very little modifications. On the night of the migration a loop occurre...
ASA 5505 IOS ver 9.2.3I need to create a firewall rule that will allow internal services to be accessed externally, but using port forwarding. For example I'd like to enable access to our NAS via ftp external on port 1545 and then have the ASA forwar...
I have a customer that has a remote office with 2 PCs that VPN in to their HQ location. Previously both PCs where at different locations now they are at the same location. Both PCs are able to successfully establish a VPN connection to HQ using the C...
Hello Jouni,Thanks for the response. So if I'm understanding correctly it will only work if I use the following commands?nat (inside,outside) static interface service tcp 21 21access-list NASFTP-in permit tcp any object NAS eq 21So the ASA is no long...
