martin.foote

HiWell my question wasn't really answered, I was just told to look at the information I already had....

Sorry I'm confused by why you would say it would use the peer link. If the interfaces to the L2 swit...

@marwanshawiThanks for this, off course I meant a resilient L2 switch like a 3750X or even two L2 sw...

HelloI have a question with regards L3 design on a Nexus 7k talking to a pair of active/passive pair...

Tested it with a Cisco RR and we've cut two minutes down to 10 seconds with default graceful restart...

Yep, we've got it on both. Some complication is our P's aren't Cisco.The PE devicePE#sh ip bgp vpnv4...

We are running the following tests:- Pinging between PE loopbacks which are learned via ISIS- Pingin...

Hi GrahamDid this fix your issue?I have a very similar problem with LDP/MPLS only with the igp being...

HI AjayThe servers in VLAN21 do have their default gateway pointing at FWSM.It seems like the use of...

Hi AjayI have drawn a diagram to try and help. On the left I have what I would expect, if a server i...

Hi AjayI understand this, but I am talking about two BVI in the same context with a FWSM operating a...

Hi CesarI'm still confused... If I had a switch with two VLANs with a firewall being the device rout...

Hi CesarThanks for the reply.I am pretty much certain that there is no asymmetric flow. The current ...

HelloWould someone please confirm to me that it's possible to create two BVI in the same context? Al...