Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have multiple L3Outs on my ACI. I have one device connected to my leaf 101 and 102. Now I am trying to connect another device to these same leaf switches on different ports and different routed subnets. Anyway to work around this error?
Hi,
I am a newbie at configuring ASA's and trying to setup a Cisco ASA 5506 for the work flow on the attached image. If anyone could please recommend the best way to setup this ASA to Deny all traffic from LAN PC to Presstek PCs with the exception o...
Hi,
I am having issues enabling the T1 card on my 4351 router. I have PRI's connected but receiving the error below when trying to enable T1 card.
T1 0/3/0: No voice port or DSP resource for voice featureT1 0/3/0: For MFT T1E1 modules, pri-group has ...
To Whom it May Concern,
I wanted to see if I could be provided a list of what Cisco Routers support SPAN and RSPAN. I currently have a Cisco 3925 router with the following image (c3900-universalk9-mz.SPA.153-2.T1.bi...
I got it to work it was the RSA key that wasn't generated for SSH. Once I did that and added my Radius commands I was able to SSH and login with my AD credentials. Thank for all your help.
I already have those commands in place but still doesn't work. I think it has to do with the outside interface also being a part of the BVI group 1. Can you look at the config below on my previous post. Thanks
