Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I’m trying to achieve that I’m able to use Duo in combination with Fortigate SSLVPN.
I’ve configured duoauthproxy.cfg with Radius Client, Server & cloud:
[cloud]
ikey=■■■■
■■■■
api_host=aaaaa
service_account_username=aaaa
service_account_password...
Hello all,
I'm currently running into some issues and the result is that we have mac-flapping between a port-channel and a normal uplink.
There's one AP connected to the switch using an Etherchannel, and the config is like this:
Switch#show run i...
the way to configure an etherchannel in L3 is using the no switchport command.If I check the config on the switch it's showing me it's in L2:Switch#show etherchannel 1 summary Flags: D - down P - bundled in port-channel I - stand-alone...
Hi,I don't understand what you mean. I'm only aware of the fact that you can configure L2 & L3 etherchannels?How could you configure this than? And for what reason would this help us in this scenario?Regards,Gerrit
Yes, there's no tunnel to the controller that would treat the rest of the traffic.There's 5 different VLAN's where users will be redirected to, depending of their A.D. membership.So we should only be using 5 VLAN's on these trunks, but still this sho...
Q: Whats the purpose of having Accesspoints in trunk mode.
When you're using 802.1X radius authentication, you need multiple vlans being able to flow over the Uplinks.
Q: why you are making vlan 55 native vlan.
Because we have a particular issue wh...
Hello,
I'm sorry, but some are exhibits from my LAB.
At the customer we're using 1/0/25-26.
We're only using the native VLAN55 on the AP's, no where else.
Because we need an IP out of that VLAN on the AP's to manage the AP's.
Kind regards,
Gerr...
