About Carlos Montero

Carlos Montero · 06-07-2010

I have an UC520 and Asterisk with a sip trunk created between them, the calls from the UC520 to the Asterisk are ok, but the calls form de Asterisk to the UC520 are always busy.Logs from the asterisk show that the first part of the call is ok, but th...

Carlos Montero · 09-29-2017

Hello Xander,How are you? I am working with CGSE-PLUS card sending translation registration to Netflow Server but the flows aren´t interpreted correctly by the software of the collector (Ubuntu Server with NFSEN/NFDUMP software), do you have any tip ...

Carlos Montero · 06-08-2010

Hi,The dial-peer 1000 was the problem, I erased it and now I can call to the UC520.Before this the busy tone was inmediately.Thanks a lot for your helpRina

Carlos Montero · 06-07-2010

Where are you sending that incoming call from the Asterisk box? In UC520, there is no configuration for sending this calls, just a dial peer that was created by the CCA when I created the trunk sipDo you have a Translation rule in place? Are you sen...

Carlos Montero · 06-07-2010

Hi,There is the debug in the atached txt file, the caller number is 3400, the called number is 7129; AA.BB.CC.DD is asterisk public ip, WW.XX.YY.ZZ is UC 520 public ipAnd the Asterisk is a TRIXBOXThanks for answering!

Member Since	‎10-07-2009 03:55 PM
Date Last Visited	‎01-10-2021 04:15 PM
Posts	5

User Statistics

User Activity

Problems between an UC520 and Asterisk with sip trunk

Re: Xander Thuijs bio & pix

Re: Problems between an UC520 and Asterisk with sip trunk

Re: Problems between an UC520 and Asterisk with sip trunk

Re: Problems between an UC520 and Asterisk with sip trunk