Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey, hope that some of you have more guys have more experience than I do with this. I was checking the memory status and I got the following output from my 6500WAN-EDGE-1#sh memory Head Total(b) Used(b) Free(b) Lowest(b) ...
I am trying to to graph the errors on Eth1/2 on my Nexus 5K. I do this via the following Oid: .1.3.6.1.2.1.2.2.1.14.IfIndex (for the nexus Eth1/2 int I am using 436211712 as Ifindex) for the input errors. This works brilliant on a router or a switch ...
Hi guys, I hope this is the right place to post, I'm a newbee in this forum.My problem is as follows:I have two 6504 core routers and they both have a connection to an access switchR1 R2| | | | | | SWThe vlan that I use...
@ Tom, well I have tried different commands and they all work fine until I tried this:WAN-EDGE-1#tclshNot enough free memory to launch Tcl shellSo yes there seems to be some error and a restart might be required.@Leo LaohooWAN-EDGE-1#sh verCisco IOS ...
Aha now I got it with respect to the erorror counters. I now read that SNMP counters cannot be cleared, so the errors might actually be true, the inteface just has been cleared and that is why I cannot refind the value!
I did some further investigation. Doing an snmpwalk snmpwalk -cpublic -v2c 10.3.95.5 1.3.6.1.2.1.2.2.1 | grep 436211712iso.3.6.1.2.1.2.2.1.1.436211712 = INTEGER: 436211712iso.3.6.1.2.1.2.2.1.2.436211712 = STRING: "Ethernet1/2"iso.3.6.1.2.1.2.2.1.3.43...
Hmmm okay, well my reason for wanting the VIP to be the one that I see coming from the interface is that if, that interface (162) goes down then my DHCP server is replying to an address which is not working anymore . My idea was that if the gateway w...
