About Sven P.

Sven P. · 12-20-2016

Hello, i have a problem with BGP AS number. We have configured two BGP peers to different ISPs on a Cisco ISR4451-X Router. One peer works fine but at the second peer the state oft the connection is always idle. When I look into the logging I see tha...

Sven P. · 08-03-2016

Hello,I have a question about stacking two cisco 3850 switches. I configured the 3850-12s switches and connected the stack cable. Ater bootup I saw at command show switch:Switch 1 -> active -> Priority 15 -> readySwitch 2 -> Standby ->Priority 1 -> r...

Sven P. · 12-21-2016

Hello Giuseppe, thank you for your answer. We will contact our partner to check his router if he support 4 byte BGP AS number. I have add a wireshark capture to the post from the BGP connection, maybe you can check if you can find something in the co...

Sven P. · 12-20-2016

Hello yes I and the neighbor peering with the correct ASN. I have configured my correct ASN at the router. No I dont use bgp local-as. I cant say if the neighbor use it. thanks Sven

Sven P. · 12-20-2016

Hello Rick, which other config do you need? thanks Sven

Sven P. · 09-14-2016

Hello again, today I received the new stack cable from Cisco. I have turned off switch 2 and connected the stackwise and the powerstack cable, but I think the problem is still the same. (Before switch 2 was resetet completely) show switch stack-ports...

Sven P. · 08-04-2016

Hy, I have done write erase and reload the switch but the interfaces are still start with GI2. Also different other configuration for example the provision of the switch is still present. I've reconfigured the Switch now and order a RMA for the defec...

Member Since	‎08-03-2016 02:30 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	8

User Statistics

User Activity

wrong BGP AS number transmitted

Problem with stacking two Cisco 3850 switches

Hello Giuseppe,

Hello

Hello Rick,

Hello again,

Hy,