Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello everyonethese days i am experiencing a problem due to Redirect ACL failure message,below i am releasing the details of my EWLCEWLC firmware 17.6.4I checked via wireshark the response received from cisco ise and indeed the connection is accepted...
Thanks fo all support @Rich R now working you are my hero,only the las qquestion you thinks is possible setting same configuration for the mobility express wlc ?thanks again !!!!
Hi Rich Rthank you so much your help has been really helpful,I receive the authentication page the acl is associated,I made an acl permet any any but I can't access the pagesniffing the packets I only detect DNS traffic strangely no HTTP trafficI che...
Hi Rich R,I believe we have found the error point, that is, my APs are in flex mode. I have created the flex profile as recommended in the guide, but how can I associate it with the profile or the WLAN? At the moment, after modifying the configuratio...
Hello Saikat,First of all, thank you for your support.Regarding the show ip access-list command executed directly on one of the APs: it does not return any output. However, when I run the same command on the WLC, I can see the full list of created AC...
this is what the cisco ise answers (captured with wireshark)and this is what I called acl by copying and pasting from the name returned by cisco ise thank you very much for the support
