Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello friends,I've installed AIP-SSM module in ASA, configed it, but have no see alerts. What i have:ASA 5520 8.2AIP-SSM 7.0(2)E4ASA# sh service-policy ipsGlobal policy: Service-policy: global_policy Class-map: IPS_TRAFFIC-CLASS IPS: card s...
Who can help me, I need device that will block bruteforce attack to our webmail servers, 5 wrong password input = block for 10 min, for example.Can I use for this Cisco ASA IPS?
Hello,I've trouble with slow TCP in one way between two sites with DMVPN.Site A (hub) connected to Internet via Ethernet, Site B (Spoke) via PPPoE.TCP speed from A to B is slow (100kbps), UDP is well (10Mbps).TCP speed from B to A is well 2 Mbps, UDP...
On 7962 SCCP phones with CUCM 6.1.5 we have problem transfering call. The transfer button don't transfer call, we need press it some times (3-5) to transfer call.What problem may be? Thanks.
I have 7975 registered on CUCM 6.1.5. And no MOH only on this device type. On other (7941, 7942, 7962) I hear MOH.On CUCM MOH was set as unicast and as multicast, no difference. Only on 7975 I hear silence. Diferrent audio source tried to use. Nothin...
Exactly dead air, no 3 beeps, nothing.And yes, RX is increasing.I can't do factory reset because this big boss phone, and no access right now. Only on weekend.It is same as MOH volume is too low, but in the parameters volume is default. And on other ...
Yes, MOH server in right MRG. And settings on all phones are identical.Yes, it's SCCP. We have only 2 devices 7975, and on both we have no MOH. Firmware is SCCP75.8-5-3S. On other phones SCCPxx.8-5-3S.Codec is g711ulaw, and it is in MOH. In the hold,...
