Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am migrating FMC from FMC2500 hardware to virtual, based on the migration path, i must use FMCv300, but it requires 64GB RAM
what i am thinking is can I after migrate to v300, then i downgrade the RAM to 32GB since i not managing 300 sensor
is that...
anyone got experience if wanted to change management port example from Eth2/8 to Eth 1/8, what is the process? go to FXOS configure another interface as Management, then plug the cable to it then can d? it does not mention clearly from the documentat...
Hi All,I have a explicit deployment with pac file, and proxy 12.5 to turn on ip spoofing feature. my setup is as below, so my enable L4TM i will SPAN the uplink GI0/1 destination to the T1 port? does only SPAN uplink is enough? and does it will work ...
Hi, 1. from the integration guide only mentioned port to open, but not mentioned what url to be permit. please advise https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01000.html#id_3...
which mean i can "fool" a FMCv10 as FMCv300 for achieve my migration from FMC2500 to FMCv?
Cisco Secure Firewall Management Center Model Migration Guide - About Secure Firewall Management Center Model Migration [Cisco Secure Firewall Management Cent...