Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got a Cisco VPN Concentrator 3005 set-up to accomodate some LAN-2-LAN-connections.How can I see which side of the tunnel initiates the connection?
Hi everybody,I want to implement QoS on my DSL-routers, with both an ingress and egress-policy.I want to be able to give a minimum bandwidth to certain protocols and still have the possibility to have those protocols use up to full bandwidth if avail...
Hi,I'm trying to establish a tunnel from a PIX to a VPN Concentrator, but the tunnel does not come up. The PIX tries to establish, but somehow, it can't.On the VPN Concentrator, I have the attached notifications in the event log.Could you provide me ...
We've got a location where we want to setup a VPN-tunnel to our HQ.At that location, there's a router which does PAT (NAT overload), and then, some hops further, there's a firewall which does NAT.Could this pose a problem to the VPN-tunnel?Here's a '...
The QoS-policy will be set on a router in a branch-office. The servers are in our central office.The routers connect to a central router of our provider, and are bundled together in a E1-connection to our main router. Therefore, configuration on the ...
This solution won't work. The method described here is CBWFQ.Also, you helped me remember that I forgot to mention that the PVC is configured in an ATM subinterface:atm 0.35 point-to-pointip address 172.19.1.1 255.255.255.252pvc 0/35 cbr 512 oam-pv...
Thanks for the reply...I forgot to update this Q last friday after I've got it up and running. Problem was that our VPNC is in a DMZ. The firewall had a route in place which screwed up the return-route from the VPNC to the PIX; no traffic ever return...
In this scenario, I believe the following is the case.A modem cannot obtain an IP-address; it is always a bridge between a device and a network. This means the router obtains an address from the ISP through the modem.Generally, the obtained IP-addres...
You might find your answer in the VPN Concentrator Configuration Guide: http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2284/products_configuration_guide_book09186a00803ec0ac.htmlOr directly in the segment about the servers:http://www.cisco....
