Hello,I have a need for a hardware compression on 7206VXR. CSA module is EoL long time ago, and we have SA-VAM2+. We don't want to use IPSec or any VPNs, but only hardware assisted compression on PPP or HDLC links. I saw on SA-VAM+ datasheet that it ...
Hello,There's an example at Cisco.com how to provide a Direct Access to Real Servers behind CSM module, and I have to configure the same but with CSS which is different in configuration.I'm using CSS11501 for LDAP load-balancing, there are just two s...
Hello,I have a question regarding the redistribution process in MPLS network on the SAME PE router.I have PE-CE RIPv2, and in the MPLS is MP-BGPv4. Between MPLS Core and LAN Core is OSPF.I redistribute RIP to BGP on PE, so I have CE routes in the BGP...
Hello,I have a problem with PE backup over ISDN PRI E1 link. I'm now in a testing phase and we're currently testing PE router backup. With CE we didn't had any problem, it works fine with NAS server and VHG router with multiVRF configuredon CE router...
Hello...I have a MPLS VPN network with two VPN customers.I would like to provide them some SLA and implement some QoS on routers. I use Cisco7206VXR and Cisco7609 for PE routers, and 2621XMs and 1760 for CE routers.On CE routers I have my local users...
Hello,Well, I've enabled compression on interface...interface Serial3/1 description To R9 ip address 150.*.*.*.255.255.128 encapsulation ppp ip route-cache flow compress lzs no dce-terminal-timing-enableAnd I have SA-VAM2+, and not CSA port-adapters ...
Hello,So, it's not propagated because it's already in RIP routing table of vrf User?I just want to add that in this scenario I won't redistribute RIPv2 routes straight to OSPF, in the same vrf User.If you're right, then only way to redistribute CE ro...
Hello,Thanks again for your reply. I'm aware of this what you've described. But this is not an answer I'm looking for.I don't know if it's possible on the same router (PE-7609) to make a redistribution of CE route 10.5.5.0/24 from RIPv2 (vrf User) to...
Hello,Topology is: CE(1760) - PE(7609) - LAN(6509).On CE there's RIPv2 with PE in vrf User. On PE there's a redistribution of RIPv2 to BGP.PE(7609) and LAN (6509) are talking with OSPF in vrf User, so same vrf as PE-CE communication.If I put redistri...
Hello,Thanks for the response, but I didn't meant in the default OSPF routing table, but in the OSPF vrf User routing table, which is the same vrf as PE-CE link.So, between PE-CE is RIPv2, vrf User, and between PE-Core is OSPF, vrf User.thaks,h.
