Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone any idea how to get this functional:From a Lan one need to make a rdp connection to a w2k server.From the outside i can ping a.b.c.dWhen i put the following into the PIX it won't work:access-list outside_access_in permit tcp host a.b.c.d eq 33...
I've got a Cisco 2621 with a bri4 module, when i make a connection from a workstation there's no problem but when i change the line into callback i can wait forever on the workstation. With debug i can see that it's trying to call a strange number (s...
Ok,As said before, I want to make a connection over the internet to a remote W2k server with the rdp protocol (standard uses tcp port 3389).At our side is a pix 515 installed.What do i have to change to let traffic over port 3389 pass the pix.Lan = =...
I don't have logs for the squid proxy server. Unfortunate i'm not at the particular location so i can't tell you the output of the show access-list.I'm aware of the stateful filtering but as i've never seen a proxy server placed into a dmz (mostly be...
Jay,When i look at the various logs i can't see anything mentioning port 3389. This PIX is a gateway for the lan and the pc from which I tried had the ip address of the PIX as default gateway.Am I forgetting something in the configuration?Erik
