Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have three 350 Eth Bridges, one root, one non-root bridge w/clients, the third a Non-root bridge wo/clients. Plus we have several Workgroup Bridges connecting to the first two mentioned wireless bridges.I can understand placing QoS filters on the...
I have a 340 Workgroup Bridge that has two PC clients and an HP Laserjet 4000N (built-in jetdirect) Printer.The printer intermittently, about 2-3 ties per day, drops out of the client/MAP list on the 340WGB.If I leave the browaser page open of the 34...
Some documents state that these two cannot communicate, other docs say they can if you change the STP and things will work.I have these connected along with three remote 340 and 350 Workgroup Bridges (WGB). The system is running but performance is p...
we have a centrally located 350 ethernet bridge that I am trying to connect to from a 340 eorkgroup bridge.The association is happening and also the WEP but I cannot ping past each unit. I can ping from one unit to the other but not to a device on t...
Did you ever find a fix for this.We are running 12.01T and found it still occurs, although I may have found an answer by entering in a preffered AP under advanced Radio settings.
Thanks for the response.There are two p.c.'s connected on the same lan as the WGB and they can still print fine, so I guess the printer is answering the arp.The 350WGB is V8.65.2 which is connected to an 350 Ethernet Bridge running V11.10T1 .I have t...
Both but the main issue is the Discarded PAckets.There is a delay in getting a new 350 but I have a spare 340 so will replace the 350.Thanks for the info
Apparently there is a difference between the STP versions on 340 and 350's.We managed to get a 350 workgroup bridge to communicate with the central 240 Ethernet Bridge.I am now having problems getting a 340 workgroup bridge to communicate with a 350 ...
