About mattbilbrey

mattbilbrey · 11-16-2009

I have the following information to create a tunnel....Our endpoint is: 66.179.80.108Our network is: 192.168.50.0 (255.255.255.0) will need to make ACL from 172.38.14.8 to hosts192.168.50.83, 192.168.50.86, 192.168.50.50, and 192.168.50.85clinic wil...

mattbilbrey · 11-16-2009

Result of the command: "! add these lines to the access list you use for traffic coming"The command has been sent to the deviceResult of the command: "! in to your public interface. change the access list name of"The command has been sent to the dev...

mattbilbrey · 11-16-2009

tunnel-group Sayani ipsec-attributes pre-shared-key *tunnel-group 66.179.80.108 type ipsec-l2ltunnel-group 66.179.80.108 ipsec-attributes pre-shared-key *!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns pres...

mattbilbrey · 11-16-2009

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absoluteaaa authentication ssh console LO...

mattbilbrey · 11-16-2009

I am using the command line interface from the ASDM. Below is the result of show startup-config: Saved: Written by enable_15 at 09:32:05.797 UTC Mon Nov 16 2009!ASA Version 7.2(4) !hostname ciscoasadomain-name default.domain.invalidenable password BA...

mattbilbrey · 11-16-2009

ERROR: % Invalid input detected at '^' marker.Result of the command: "crypto isakmp policy 1 authentication pre-share"The command has been sent to the deviceResult of the command: "crypto isakmp policy 1 encryption 3des"The command has been sent to t...

Member Since	‎11-16-2009 11:55 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	8

User Statistics

User Activity

VPN with crazy NAT

Re: VPN with crazy NAT

Re: VPN with crazy NAT

Re: VPN with crazy NAT

Re: VPN with crazy NAT

Re: VPN with crazy NAT