Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I run a city network in Sweden with a lot of different service providers. The service providers assign a IP network to us for use with their service. Ex. an ISP assign a /19 to us and its up to us to mask it and run DHCP to the customers. To make ...
Hi,I?m trying to establish a point to point MPLS VPN between 2 Metro 3750 switches(c3750me-i5-mz.122-35.SE2.bin). Both switches has the exact same basic config and all looks fine, ISIS is up, BGP is up, LDP is up.All routes are where they are suppose...
Hello,I have problems getting a 12000(GSR),GE-GBIC-SC-B, and a 3750 metro connected.The GSR is running 12.0(32S) and the3750 12.2(25)SEE. I have tried just abouteverything (no negotiation auto) and thelink just don´t want to come up (yes, thephys lin...
Hi Mirco,I see your point, I do not have any problem getting the /19 route distributed within the vrf I originated it in (the service vrf for example). I do redistribute static in bgp so it's in all the boxes. The thing is that I wanted to do export ...
Hi,That should work if everything was in the same vrf. I'm trying to do something like the following:ip vrf a description ### VRF A ### rd 100:1 export map vrf-b-export route-target export 100:1 route-target import 100:1ip vrf b description ### VFR B...
Thanks a million !You put me on the right track. It seems that it?s not possible to just use loopback if:s.When I made a vlan interface in the same vrf in each switch it all worked fine.Now it?s also possible to ping between lo interfaces.....Nice "f...
It?s the same even if i use lo99 as source. I will try 12.2(25)SEG.Router 1Borlange-MPLS#pingProtocol [ip]:Target IP address: 172.22.22.22Repeat count [5]:Datagram size [100]:Timeout in seconds [2]:Extended commands [n]: ySource address or interface:...
