Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Experts,Currently I am facing issue in my HSRP as it shows Active for few interface on both Routers.RouterA - 2800 series - MPLS link- BGP protocolRouter B- 2600 series- ATM Link- Eigrp ProtocolAs per my knowledge I have configured all the set...
Hello All,I want to configure my switch to show me logs of all the activities performed by a any specific user which is created on that switch.I donot have tacacs server .I have used the below command to achive so but cudnt succeed.aaa new-modelaaa a...
Hello,I am seeing the following error in in my router which is configured with EIGRP Protocol.Can any one tell me what are these logs about.Sep 29 00:41:56: %DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 10.3.250.18 (GigabitEthernet13/24) is down: retry lim...
Hello GS,I am looking to configure Redistribution between EIGRP & BGP Protocol.Current scenario:-Core Switch: Only configured with EIGRP for ATM 2MB link.WAN Router : Configured with EIGRP for ATM link and BGP for MPLS 10mb link .Due to this All Traf...
Hello All,Can you please look at my configuration and suggest your ideas.My Current network details:-Br_router- HQ router- Etisalat ISPCloud for internet- Branch ofc router and HQ are connected with a Leased line .-From HQ router Internet link is con...
Hello Glen & Guissepe,The current switch which you are seeing is connected from a switch using a up link connection and this switch is running in Server mode.CDP nei status of the switch is which is server mode.SC-H1-D1-C2950C24# sh cdp ne...
Hello Giuseppe,Thank you for your Post.I wanted to undrstand from you that after allowing only required vlans and block other vlans in the trunk port will RESOLVE my HSRP issue.Did you find any problem in HSRP config or in other details.Please let me...
Hello Jon,Switch STP error:Nov 20 20:16:13.340 UAE: %SPANTREE_VLAN_SW-2-MAX_INSTANCE: Platform limit of 64 STP instances exceeded. No instance created for VLAN306 (port Fa0/10).Please look at the Output below:-" IS this SPT error occuring due to swi...
Hello Edison,Thanks for your post!I am not able to achieve my desired resultwith the above post.Can you suggest me how this command will help me to show per user log of their changes what i type in the global mode.. when we want to see in Sh log comm...
