Hi,I'm pretty sure I've seen a solution to this problem before but I just can't seem to find it...I have LAN users trying to access servers in the DMZ via their public IP's. They go out the outside interface to do this but are getting dropped as spo...
Hi,Any chance anyone knows the specific MIB's for an ASA 5520 and 2821 ISR?Finding it difficult to track down the exact ones I needhttp://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2Thanks,Denis
Hi,I'm not sure if this would be more suited in the R&S forums but I figure some security people must have worked on something similar....I have an ASA sitting behind a 2800 router with 2 Internet circuits. I'm trying to NAT everthing from the ASA in...
ACS Solution Engine Datasheet, good place to start...http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps2086/data_sheet_c78-453387_ps5338_Products_Data_Sheet.html
Hi Matt,You shouldn't need item number 4 - The NAC Manager Lite is an Appliance (CCA-MGR-LT-K9) and includes licensing, I'm not too familiar with the Network Modules & how the licensing works for them but that brings things to about $8,500 list.HTH,D...
Not sure if this is 100% relevant but I had something similar for ASA 5520 and 2821, the only thing I could find was the cut-through proxy feature which requires authentication:ISR:http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cg...
Hi, found this link, may be of some use:http://www.cisco.com/en/US/docs/wireless/technology/clean_access/technical/reference/cleanAN.htmlCan you let me know how it goes? Have to deploy a similar solution in a couple of weeks!
