Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone,I would like to know if you can invent the phone number yourself when migrating VoIP in a real company, or if you have to apply for it somewhere?Thanks in advance
HiHow could I fix this case? I get the message in GNS3 from ASA "asav9-22-1-1.qcow2".Warning: ASAv platform license state is Unlicensed.Install ASAv platform license for full functionality.Thanks in advance
Hello everyone, this is my first experience with ASA in GNS3. My PC3 from outside cannot communicate with the DMZ. What should I change? Thanks in advance********************ASA Version 9.8(3)!interface GigabitEthernet0/0 nameif outside security-leve...
HiI have done changed the Template C3725 to a switch, but i could not use any Interfaces as a switchport:I get message:Unused for Layer2 EtherSwitch Is there any way to change all Interfaces to switchport?Thanks in advance
Hello everyoneFor my old ASA 5505 V06 with serial number JMX1353Z1NS, I need a new iOS version with ASDM software for practice purposes. Where can I buy and easily download it?Thanks
Dear Rob!I changed it so and everything go well!ASA(config)# object network DMZ-netASA(config-network-object)# host 20.20.20.1ASA(config-network-object)# nat (DMZ,outside) static 172.16.1.20PC3> ping 20.20.20.2084 bytes from 20.20.20.20 icmp_seq=1 tt...
@robI did it, but there is no connection from 10.10.10.10 to 20.20.20.20!Other connection are well!PC3> ping 20.20.20.2020.20.20.20 icmp_seq=1 timeout20.20.20.20 icmp_seq=2 timeout20.20.20.20 icmp_seq=3 timeout20.20.20.20 icmp_seq=4 timeout20.20.20.2...
Hi Rob!It will be thanksful, when you look at my Config and show me which IP is the correct for DMZ static:interface GigabitEthernet0/0 nameif outside security-level 0 ip address 172.16.1.2 255.255.255.252!interface GigabitEthernet0/1 nameif inside s...
