Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please see my attach file (router1-FTD-router2), all devices in area 0.Does I need policy to permit ospf like these to permit ospf protocol go through FTD?- source: 10.0.1.0/24 destination: 192.168.1.0/24 service/application: OSPF- source: 192.168.1....
Could you help me check oid of cpu and memory as the cli command below ?
> show cpu usageCPU utilization for 5 seconds = 8%; 1 minute: 9%; 5 minutes: 9%
>> show memoryFree memory: 46568759296 bytes (62%)Used memory: 29531140096 bytes (38%)-----------...
We have deployed sourcefire 7125 with defence center 1500 recently.
We get alot of alert through email about 10.1.1.10 with port 445, 10.1.1.10 is our share file server so that is normal to open that port in the server.
How could we classify that 10....
We have router 4331 and L3 module SM-X-ES3-16-P:
L3 module trunk with router through Internal interface, Ethernet-Internal1/0/0. On L3 module config vlan 1,2,3.
On Router, I config brigde interface bd11,bdi2,bdi3
interface Ethernet-Internal1/0/0 no ...
Dear Marvin,
I think DPD only use for vpn. We have applications go through FTD with long duration session. I need DCD for better control the application, at least we we want function that firewall will sent both side (inside & outside) to reset con...
