Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have CISCO 877 ROUTER WITH A SINGLE EXTERNAL IP ADDRESS INSIDE (VLAN1) = 192.168.0.0/24OUTSIDE (DIALER1) = 195.149.45.229 We have clients on INSIDE who have full internet access. We have NAT working – a one to many NAT. ip nat inside source stati...
we have user who are on DHCP and would require some user to access FTP server which is on the outside. However being on DHCP it is not possible so suggested to use a internal server and ftp from their but it still doesn't work after allowing through...
Urgent helpOur ISP have black listed us due to them recieveing lots of SMTP traffice from us.We need to find out the source of the issue from the inside sending SMTP traffice to outside.Is their a way to capture smtp traffice on the ASA. and also who...
We have a 6509 with Sup720 10ge and when connecting to the MPLS circuit, the device is notseeing receiving the EIGRP Tags, and by doing so is causing routing loops.We need to work out if the issue is code related as this is working on another site wi...
What we are trying to do is:- Nat 217.169.63.147 to redirect to an internal IP of 195.118.216.164 - Open the firewall to allow port 22 inbound to 217.169.63.147 (before the changes get made that port 22 would need to be opened if we already have a VP...
