Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I set up a basic Linksys E2500 with the following information and connected to the internet straight away without a problem:I have spent several hours simply trying to get this basic information into the Cisco 819 using CP Express without success, i....
hi,I tried entering the script suggested by Samuel. Unfortunately the command "nat" after object network SERVER-OBJ is not recognised by my CLI. These are the only supported commands:Network object group configuration commands: A.B.C.D Netw...
OK, I think the first suggestion may have been almost correct then, thanks. But if I wanted to add more than one internal host (in fact all in the range 192.168.1.100 to 149) is there a way to do that or will I have to create 50 object network SERVE...
Thanks. Is the host IP my external IP or the internal IP of a particular client? I need to do this to permit VoIP traffic to some tablets that are connected wirelessly to the internal network and have IPs dynamically assigned by DHCP.
