Confirmed. The calculation would be as follows:2,976,000 * 48 = 142,848,000 pps.~143 Mpps.Nearly 4.7x the rating of 30MppsJames

With 64 byte packets a Gig-E connection can push 1,488,000 in each direction, so Full Duplex would be 2,976,000. That is a per port number. Just multiply that times the number of ports and you'll reach your 30Mpps pretty fast. Keep in mind that t...

Actually, that is not correct. All of the 48 port Gig-E line cards for the 6500 are oversubscribed; it does vary by the degree of oversubscription. In a 6506 or a 6509 (with a Sup720) you have (2) 20 Gbps connections (per slot) to the fabric. With a ...

http://www.cisco.com/en/US/products/sw/secursw/ps5318/products_data_sheet0900aecd800fd118.htmlI'm not sure if it's supported on non XM platforms. But it is on the 2600XMs.Cisco 1700 Series Modular Access Routers and Cisco 2600XM Series · Cisco SDM s...

The link you provided is for a 2900XL switch, not a 2950 switch, they have different hardware and work differently.