Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all experts,I have two CSSs 11150 and have configured them as following:CSS-1#circuit VLAN100 ip address 172.10.10.101 255.255.255.0 ip virtual-router 1 priority 105 preempt ip redundant-vip 1 172.10.10.1 ip critical-service 1 up_dow...
Start from last few months, one of our PIX firewall start self reload. We cannot find any logging that indicate the PIX crashed, the only thing we get is the short system uptime. We have check the power source and it seems working fine. Do anyone fac...
One of our router is connecting to IP phones via FXO voice-port. The user found that they cannot make a phone several call every months. During the problem, users can only heard busy tone from the phone. Once the user reported, we will enter the foll...
Hi experts,Do anyone know that how nat affect the performance (speed)? As I found that the response is slower when I am setting nat at the PIX/ASA. Here is my situration:Server <=> PIX <=> ClientTesting with a tcp streaming server:1. Without setting ...
Hi experts, I am configure a new CSS 11506. But I got the problem for accessing the management port. After connected between CSS mgmt port and a laptop, the CSS is unable to ping the tap. Does any expert know what is the problem? Is it related to spe...
Hi p.bevilacqua,Already configured disconnect supervision and here is the config:voice-port 1/0/1 supervisory disconnect anytone cptone CN timeouts interdigit 3 timeouts call-disconnect 3 timeouts wait-release 3!During the problem, I found the follow...
Hi Patel,I have the same problem also. But the different is I can't telnet or using ASDM CLI to configure the PIX. It seems related to telnet demon problem. Also I have already tried enter:no telnet INSIDE telnet INSIDEBut the result is failed. A...
Hi Kredmon,Thanks for you great idea. But actually the VPN is using by our users, so we are unable to setup host-to-host setting. But in the other side, I have checked the Internet connection which from my local to the remote peer, the ping result is...
