Hello All,
i am trying to configure 802.1x on Cisco 3750 switch, my radius server is on windows server 2012 R2. wireless clients are authenticating through that radius server. after configure 3750 and tried to connect a wired client (...
Hello All,
i need your help in configuring internet failover on Cisco 3750 switch. what i have is:
- 1 Cisco 3750 switch- 3 Cisco 2970 Switches that i want to use as distribution on LAN.- have 2 internet from different ISP's. - want to have 4 VLAN's ...
Hello,
finally, i am able to authenticate windows 7 clients with server 2008 R2 NPS.
thanks for all the support.
below is the URL that helped me in the scenario, for people who are stuck this link is very useful:
http://www.cisco.com/c/en/us/support...
Hello,
sorry i was busy in some other tasks that's why i couldn't test this scenario but it has suddenly become on top priority and i have to configure this as soon as possible.
i am getting the below logs now on NPS server:
Network Policy Server...
Hello,
i dont see any logs on NPS in event viewer, except for :A LDAP connection with domain controller <domain> for domain <domain> is established"
below are the logs of switch:
*Mar 1 00:40:55.404: @@@ dot1x_auth Gi1/0/5: auth_initialize -> au...
thanks for the response ivangonz,
below are the logs and output:
NPS:
A LDAP connection with domain controller <domain> for domain <domain> is established.
output of the command on switch:
Switch#show authentication sessions interface gigabitEthernet...
Hello Marwan,
i know this is old thread, but i followed your document to configure the fail over and load balance on 3750 switch. i have skipped the NATing part because 3750 does not support NAT.
what happening is that:
i can ping googl...
