Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am trying to enable my PIX for IPv6, so that I can connect from my internal LAN into my DMZ. But I run into some problems and I am not sure if I understand the IPv6 inplementation on the PIX correctly.In IPv4 I can create a connection from host ...
Hi,I am trying to read the forwarding tables from one of my cat 4500 for lets say vlan 20. with snmp v2 its not a problem. It works like this:snmpwalk -c public@20 crumpy dot1dTpFdbAddress So I have to let the switch now in what vlan I am interested...
Hi, I tired to upgrade my APs via tftp from 12.2(8)JA to 12.2(11)JA1. This seems only to work if the tftp server is on the same subnet as the APs (no vlans configured). If I tried to use a tftp server on a different subnet I could not see a single tf...
I know that document.I just checked, no "tftp-server filename " and no "ip rcmd rsh-enable" and "ip rcmp rcp-enable" lines in my config. I also did a no "ip rcmp ...." hoping it would disable the rsh server. but they are still up. I know they should ...
