Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We purchased a LinkSysRouter (model RV016). This router supports multiple ISP's, failover and load balanceing automatically. We also have and use a Cisco ASA5510 as our comapanies firewall with 3 ethernet interfaces. How would I configure the ASA55...
I'm attempting to get the AT&T Global Network Client to work thru our ASA5510. With my current congiguration if I add the following statement:STATIC (inside,outside) interface A.B.C.D. (addr of pc that's running the client) NETMASK 255.255.255.255 T...
How do I go about connecting 2 ISP's to 1 ASA5510 with 4 interfaces. I DO NOT want failover or redundacy. I want access to both ISP's. We have a flat network on the inside. All pc's and servers have a STATIC address assigned to them (172.16.x.x). ...
What commands are necessary to allow certain pc's connectivity to a Comcast broadband connection on our ASA5510. It has 3 interfaces. 1 is our inside network. 1 is our outside connection for our Stratus Wave ISP which uses a static IP address and ...
Have an ASA5510. Can SEND files from PC's from the inside network to a particular FTP Server but cannot RECEIVE files from the same FTP Server. Any help would be appreciated.
That makes sense about source vs destination.I just completed a Cisco class on the ASA5510 with version 8.x and I THOUGHT the instructor said you could do what I am attempting (2 ISP's with load balancing) but he didn't elaborate on HOW? I woud thin...
I'm running version 8x on the ASA5510. Can I accomplish what I want using STATIC ROUTES? If so...how would I do that? The Comcast ISP connection is using DHCP. The one PC I want to go out over the Comcast connection has an IP address of 172.16.3....
