Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have a Cisco 3825 (MGCP) with a few E1 and we want to add the NM-HDA-4FXS module to connect modems. We are using Call Manager 6.1. Doesn't anyone know if this will work fine or do we need a different card to connect the modems?Cheers,Emilio
Hi,I'm having some problems to understand an output from the EIGRP topology. I attach the config of router 1 and 2 also the "show ip eigrp topology..." outputBasically, I got a router peering eBGP with an MPLS provider and EIGRP internally, I got the...
Hi,I got 2 6509 with one FWSM in each one. My default licence allow me only 2 context-fw. I would like to buy the licence "FR-SVC-FWM-VC-T2" which is for 50 context-fw. I'm using the firewalls in Active/Standby. Do I need to buy 2 of this licences or...
Hi,I would like to understand how pix do the firewalling, ie. a Packet from inside go to outside (webserver), the nat and global are done and there is an outbound filter for inside allowing http.Which will be process in the pix, first look for ACLs i...
Sound better as they support DID, if the 3825 has 2 x VWIC2-2MFT-T1/E1 cards and 2 x PVDMII DSP SIMM with 4 DSPs. Can I just stick the VIC-4FXS/DID in the HWIC2 module (as I already have som PVDM in the chassis) or I will need to get an NM-HD-2V to s...
Thanks.I forgot to say that LAN1 and LAN2 are advertised in both router (BR1 and BR2) for redundancyAlso NET_PRI/SEC will manually tune the metric to make the return traffic for LAN1/2 symmetric.
