Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Yes, if you have those licenses for your APs in your smart portal the c9800 will use those to manage the APs.You need one Essential license for each AP and one Advanced license for all APs that you want to use features included in the advanced li...
Hi, C9800 uses smart licensing. The contoller/VM dont need a licens but you need licenses for all APs you want to connect to the Controller.https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/smart-licensing.html...
Hi, I can see two ways to do this.Either change your design to flexconenct on both sites so you have the same configuration everywhere.Or place the AP in Flexconnect mode but have the SSID on site1 as a local SSID. But on site2 the SSID as a Flexconn...
Hi, If it is 1852E-B-K9 then it is most likely in capwap mode. TO have cisco ship it in ME mode then it should be named 1852E-B-K9C. Here is how to verify what image type is running and how to change mode:https://www.cisco.com/c/en/us/td/docs/wireles...
Hi,There are a couple of things the AP does when selecting a AP to join. Here is a link to what order the AP does things.https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/70333-lap-registration.html#anc8What WLC are you u...
