About Sean Wright

Sean Wright · 03-01-2010

Hi all, We have multiple VLAN's with one DHCP server. I have configured what I think is correct to get different VLAN's picking up a dhcp address from the VLAN with the DHCP server in but, it doesn't seem to be working. Here is the config. (VLAN 10 h...

Sean Wright · 02-25-2010

I have installed a 2106 WLC with software version 6.0.188.0. I can happily see 1142n access points but I wanted to know if it supports 1010 access points? I have tried looking for the documentation but I have been unsuccessful, hope you can help! Ki...

Sean Wright · 11-24-2009

Hi all,We are looking to implement a VoIP telephone system.I know the phones we are going to have use 5 watts each yet when I look at the switch port they are plugged into, it says it is giving out 15 watts. I think this has something to do with the ...

Sean Wright · 03-02-2010

Hi Chris,All sorted.The DHCP server did not have a scope that was on the same subnet as itself.As soon as I configured that it started giving out IP address.Thanks for your help.Jamie

Sean Wright · 03-01-2010

Sorry long day, needed to be in conf t.Ok so now when I run it I get "All interfaces are trusted source of relay agent information option".J.

Sean Wright · 03-01-2010

Chris,I haven't got that command?If I type ip dhcp ? the options I have is snooping?J

Sean Wright · 03-01-2010

Hi Chris,Nothing appears when I runn that command?J.

Sean Wright · 03-01-2010

Hi Chris, thanks for your reply.I can ping the DHCP server when I manually put in the IP address and routing is enabled.Jamie

Member Since	‎11-24-2009 03:12 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

IP Helper

Supported Access Points?

Cisco POE overload

Re: IP Helper

Re: IP Helper

Re: IP Helper

Re: IP Helper

Re: IP Helper