About troy.lawrence

troy.lawrence · 07-18-2008

I would like to know how this works. Lab tested selecting reload when finished and use current running image as TFTP fallback. SWIM job started, I waited for the flash file to show deleted on my 2811, then issued a reload command.Device is in rommo...

troy.lawrence · 06-12-2017

Also an issue in: Nexus7000 and Nexus 7700 7.2(2)D1(2)

troy.lawrence · 07-23-2008

Would the Capture Packet from CW works for this or does there have to be a external sniffer in front of the router?Is this option only feasible for a LAN, or will this actually work over a WAN connection?

troy.lawrence · 07-18-2008

The old file is still in the tftp boot directorycwsrbqa1:/tftpboot> lsC2800NM_RM2.srec.124-13r.T5 rep_sw_765676666105472852c2800nm-entservicesk9-mz.124-18.bin rep_sw_8721821259821398922rep_sw_765676666105383645

troy.lawrence · 07-18-2008

selected only the 'use current running image as TFTP fallback'upgrade was successfull.boot-start-markerboot system flash flash:c2800nm-entservicesk9-mz.124-19.binboot system tftp c2800nm-entservicesk9-mz.124-18.bin 223.168.150.26warm-rebootboot-end-m...

troy.lawrence · 07-18-2008

Last one before I test.Should I select both or just one of the below options? Use current running image as TFTP fallback image. Backup current running image.

Member Since	‎01-12-2004 07:37 AM
Date Last Visited	‎10-19-2022 09:20 AM
Posts	8

User Statistics

User Activity

LMS2.6 SWIM use current running image as TFTP fallback

Also an issue in: Nexus7000

Re: LMS2.6 SWIM use current running image as TFTP fallback

Re: LMS2.6 SWIM use current running image as TFTP fallback

Re: LMS2.6 SWIM use current running image as TFTP fallback

Re: LMS2.6 SWIM use current running image as TFTP fallback